This article underneath pertaining to water heater replacement is amazingly compelling. Don’t skip it. If you would like help with a water heater click here and connect to a professional. click here
On-Demand Water Heater Replacement & Service
How to Tell if You Need a New Water Heater
Your water heater is likely on its last legs if you notice…
You run out of hot water to soon
Your water does not come up to temperature
Water leaking around the unit
Rust or sediment can be seen in your hot water
We provide 24-hour emergency service to ensure that your hot water is back to normal as quickly as possible in the event of a problem.
Tankless Water Heaters
Also known as on-demand water heater, tankless water heaters have been available in Canada for decades now and have been very common in Europe and Asia for much longer. Much smaller than the traditional hot water tank, they can offer reduced energy costs and continuous hot water at a precise temperature. Though they cost more to purchase, they will save you money over the long haul, and are best suited for smaller living areas where space is limited.
Installation and Replacement
Installing or replacing a water heater is not a do-it-yourself job. Because hot water systems require natural gas or high-voltage electrical hook-ups, as well as proper venting of carbon monoxide gas, installation needs to be done by a qualified gasfitter or plumber who is certified for high-voltage electrical work.
Improper installation of a hot water system can mean a high risk of catastrophic damage, including personal injury. Shamrocks’ will ensure your new water heater is properly installed so that you can enjoy years of safe hot water with peace of mind.
Water Heater Maintenance
Water heaters are typically out of sight and out of mind. However, they do require regular maintenance in order to provide long life and reduced energy costs.
If you live in the Central Okanagan, we can set up an annual maintenance program that will keep your water hot and your costs low for many years.
Shamrocks Plumbing and Heating is your Central Okanagan source for all things related to hot water heater problems. Count on us for guaranteed work at competitive rates.
We are a professional Kelowna plumbing company who’s able to carry out any of your home service needs, including regular maintenance, installation, leak repairs and any kind of plumbing work in residential and commercial environments. Tap, toilet or tub… whatever it is that you require you can trust us to send out a certified plumber to handle everything in a polite and competent manner.
Emergency Plumbing
Repairs can vary from modest things – like a leaking faucet – to those that are, or possibly could be, catastrophic. Our dedicated team of plumbers have got the skills, tools and experience to remedy just about any obstacle that you run across, and they are specialists at pretty much everything from pipework to troubleshooting leaks.
We can immediately deal with all kinds of plumbing issues that may arise at your house or business. If you have a plumbing related emergency, don’t hesitate to call. We have a 24 hour emergency plumber on call who will be dispatched to your premises ASAP. Any time day or night, you’ll be able to trust in us for timely and attentive support whatever you emergency. We know exactly how stressful plumbing related problems are, especially when it’s an emergency situation after the regular working day.
Installations of All Types
Shamrocks Plumbing has got a long standing history of high quality workmanship. Regardless if you would like to get some insulating pipe, or a nice new bath installed, or you need a re-pipe or installation in a commercial or residential premises, we have the ability and working experience to make sure any work is done to code.
We are in addition a recognized leader for replacing the plumbing systems of old properties, something we have been achieving for many years, most noticably in the many stunning houses in Kelowna BC.
Our exceptional commercial and residential plumbing service is the best option for newer homes and older properties all over the Kelowna area.
We had been shown that report on hot water tank services through someone on a different web property. Sharing is caring. Helping people is fun. Bless you for your time. Return soon.
On this page underneath you will find a lot of awesome facts involving plumbing services. If you need to call a pumber click here
Plumbing Leaks
If you’ve got a leaky faucet, a dripping valve or any type of plumbing leak that’s hard to get to and you don’t want to fix yourself call us, we can fix that sort of thing right away. For valve replacement we carry common parts in our trucks and have quick access to anything else we may need in inventory at our warehouse.
You can fix a leaky kitchen or bathroom faucet yourself if you have the right tools, but if you need help, we repair this type of plumbing issue all the time. Kitchen and bathroom faucets tend to leak when the washers are too compressed to seal properly and need to be replaced. If you want someone to do that for you, we are just a phone call away.
Leaky Plumbing
If there is a plumbing leak behind a wall or somewhere else in your home the telltale signs will show up several ways. Some of the most common signs will be something like moisture under a sink, wet or dark spots on walls, ceiling or the floor.
Pipes with a slow leak can cause serious water damage if not caught in time. Also keep in mind that once there is a leak, it will probably worsen over time. If you find signs of a water leak in your home, and can’t find the source, call us right away to resolve the issue. On occasion we find it necessary to open a wall to get access. If it’s something simple we can get it fixed right away and you can get on with your day.
Appliance Connections
One of the most common causes of a residential flood is when a washing machine water hose gives out. It doesn’t just drip and make a mess; it usually bursts wide open and floods your laundry room. We like to suggest replacing the plastic hose included from the manufacturer with a braided hose, which is much stronger and more flexible. Braided hoses last longer and don’t rip wide open if they ever do spring a leak.
Another common appliance leak is found behind the fridge. The water inlet valve on your fridge may be loose, faulty, or clogged. You can find it at the bottom of the refrigerator in behind. This line is for water and ice and if it is damaged or not fully connected, it will leak.
For any issue like these mentioned above, call us for reliable service and repair. We carry all common parts for replacement or to upgrade whatever is needed.
How To Fix a Leaking Shutoff Valve
When a valve leaks it is typically around the water valve stem. The water valve stem goes through a “packing” nut and washer, which provides the seal. Back in the day, fiber was packed around the stem and that’s why it’s called a stem valve.
The nut may be loose so try tightening the packing nut a little to snug it up. Use a wrench not pliers, so you don’t ruin the nut. If that doesn’t work the packing washer is probably damaged and will need to be replaced.
If you need help with any of these issues call us for assistance.
Customer service satisfaction is essential and will be a certainty in any service-oriented company. Satisfying a client with good services makes sure the plumbing company who provided the service would be hired to work on another project for the same customer. Testimonials and word-of-mouth publicity from a satisfied patron are the best tools to use so that the company may get more work. It is clear you will probably recommend a company to your friends, colleagues, and relatives when you have received good service from that company.
This standard applies whenever you hire the likes of any plumbing contractor to put in all the plumbing needs of a building or house. Keep in mind, plumbing systems are not limited to basic plumbing fixtures or setting up of pipes. It includes water heating appliances, the whole kitchen and bathroom installations, which includes the sink as well as the shower and tub.
Other things that the plumbing company must be able to offer involves cleaning plugged pipes, repairing waste disposal units and replacing faulty pipes. A plumbing company may also include heating and gas installations as part of their primary services. Every aspect of a plumbing service is important as you enjoy the luxury and comfort of your home.
The Lifetime Value of Every Client
A consumer is pleased when the plumbing company provides good work . The consumer, in most cases, will tell their relatives and friends about the overall quality of service they had. This referral advertising is important as it provides the company with valued leads. This is a chain reaction, which helps to to create a solid client base for the company. In such a scenario, any plumbing service that values their reputation and desires to serve the local community over a long period will make sure that the overall quality of their work is reliable.
Regional Plumbing Code and Rules
Different laws specific to where the business is found holds plumbing companies and services they provide. This ensures the safety of service from all those who are conducting such business. The industry must be regulated in order that the local government is assured that only quality plumbing businesses are operating in their area. Whenever you want to hire a plumber, look online for testimonials on local companies and try to find out if they are the right fit for your needs.
Many people believe they can fix their own plumbing issues. However, they need to remember they are governed by the identical set of regulations and laws that binds plumbers. You may be putting your loved ones, and possibly the entire building at risk if you attempt to do the job yourself. Hiring a licensed professional removes the headache you would go through while you attempt to repair the plumbing yourself. This removes the problems you face when attempting to fix a plugged or leaking plumbing installation in your own. It is not worth sacrificing that trivial money for a service you understand little about.
Do you really like reading about plumbers? Make feedback down below. We’d be happy to know your thoughts about this write-up. Hoping to see you back again before long. So long as you appreciated our article plz don’t forget to share it. Thank-you for taking the time to read it.
This article which follows in relation to plumbing contractor is rather captivating. Have a go and make your own findings. If you need to call a pumber click here
6 Useful Plumbing Tips for Beginners
Are you ready to become a DIY plumbing expert, or at least someone who can fix the minor plumbing issues that come up? You could save many hundreds of dollars by taking care of dripping faucets or overflowing toilets yourself. Take care of minor plumbing problems before they become something only professionals can solve.
We’ve got six useful tips that you can apply to your plumbing problems as soon as you have the right tools. You may be reluctant to tackle tough plumbing projects alone, but small clogs and leaks can often be fixed without calling in the professionals. It’s a good idea to have a plumber’s number on hand just in case you encounter an issue you can’t solve. Hopefully, you will likely find that minor plumbing projects are easy and satisfying to work on by yourself.
Don’t Be Afraid to Replace Parts Inside Your Toilet or Faucet
Taking apart pipes under your sink or shower can lead to messy issues if you make a mistake. However, there’s very little you can damage by trying to replace your toilet’s flapper or your faucet’s cartridge.
Worn flappers are a common cause of leaks between the toilet tank and bowl, and they only cost a few dollars! As a bonus, the package comes with easy-to-follow instructions for replacement.
Most modern faucets can be repaired by replacing the entire interior with a new cartridge. This only requires that you remove a screw or two. So, if you hear the toilet running frequently, or your sink is dripping, get replacement parts and give it a go.
Remove Clogs Without Chemicals
Next time your drain is clearing slowly, don’t buy expensive, chemical drain cleaners. Manually unclog a drain with a drain snake. Just insert into the drain and pull back out with (hopefully) the clog culprit attached. If you don’t have or don’t want to hassle with one, try using a wet/dry shop vacuum to suck out the clog.
Check Your Showerhead for Issues
Thread tape is also one of the easiest ways to fix a dripping showerhead. Chances are, the leak means the threads aren’t connecting tightly. Unscrew the showerhead, apply new tape by wrapping in a clockwise direction, and re-attach to stop the drip.
If the showerhead is clogged, soak it in a bowl with warm water and vinegar for about an hour. Use a small brush to loosen any mineral deposits that could be causing blockages in the spray.
Forget Thread Sealing Compounds—Use Thread Tape
Thread sealing compound, commonly known as “pipe dope,” can drip and smear. For most DIY projects involving pipe threads around the house, thread tape will work just as well or better. You can buy a multi-purpose tape, which is usually white. Thicker tape is usually yellow for gas or pink for water. Try one of the thicker options for easier handling.
When you wrap the tape, roll it counterclockwise around the threads. Can’t get the roll into a tight space? Wrap a few turns of tape around a cheap pen and apply from that. You’ll want to wrap your tape around the pipe threads roughly three times for best results.
Customer service satisfaction is essential and should be a given in a service-oriented company. Satisfying a customer with quality service makes sure the plumbing company who provided the service will be hired to work on another project for the same customer. Testimonials and word-of-mouth marketing from a satisfied patron are the most effective tools to use to ensure that the company can acquire more clients and customers. It is obvious you will probably suggest a company to friends, colleagues, and relatives if you have received good service from that business.
This principle applies when you hire the likes of any plumbing contractor to install all the plumbing needs of a building or house. The plumbing system is not limited to installation of water pipes and the basic plumbing fixtures. It includes the hot water tank, the whole kitchen and bathroom installations, which also includes the sink in addition to shower and tub.
Other basic offerings of a plumbing service that a plumbing company should be able to provide are the fitting of busted pipes, waste disposal units along with its cleaning and clearing of blocked pipes. Most plumbing businesses also have gas and heating work plus equipment installation as a part of their services. Every aspect of a plumbing service is important as you enjoy the comfort of your home.
Repeated Business Arises Ffrom Good Work
A customer is happy when the plumbing company provides good work . In most cases, this person will tell a friend about the quality of service they received, thereby perpetuating referral advertising, which is the most beneficial lead any plumber could get. This having been the case, any plumbing service who values their track record and also have a desire to serve the community for a very long time will be consistent with the quality of their work.
Local Code Regulations
Plumbing contractors and what they offer are bound to different laws and regulations specific to the place where it is located. This assures quality of service from all those who are providing such business. The industry needs to be regulated in order that the government is assured that only quality plumbing contractors are operating in their area. Look online for reviews on local firms whenever you require a plumber, and try to figure if they are acceptable enough for your requirements.
Many people think they can fix their own plumbing issues. However, they should remember they are governed by the same set of regulations and laws that adheres plumbing companies. You may be putting your loved ones, and possibly the entire building at risk should you attempt to do the job yourself. Therefore, hire a professional to do the work. This eliminates the hassles you face when attempting to fix a plugged or leaking plumbing installation on your own. It is not worth compromising that small sum of money for a service you understand little about.
Hopefully you liked our part on plumbing service. Many thanks for taking the time to read our article. In case you enjoyed our blog entry plz do not forget to share it. Thank-you for taking the time to read it.
This article listed below relating to hot water tank repair is incredibly insightful. Try it and draw your own personal assumptions.
On-Demand Water Heater Replacement & Service
How to Tell if You Need a New Water Heater
Your water heater is likely on its last legs if you notice…
You run out of hot water to soon
Your water does not come up to temperature
Water leaking around the unit
Rust or sediment can be seen in your hot water
We provide 24-hour emergency service to ensure that your hot water is back to normal as quickly as possible in the event of a problem.
Tankless Water Heaters
Also known as on-demand water heater, tankless water heaters have been available in Canada for decades now and have been very common in Europe and Asia for much longer. Much smaller than the traditional hot water tank, they can offer reduced energy costs and continuous hot water at a precise temperature. Though they cost more to purchase, they will save you money over the long haul, and are best suited for smaller living areas where space is limited.
Installation and Replacement
Installing or replacing a water heater is not a do-it-yourself job. Because hot water systems require natural gas or high-voltage electrical hook-ups, as well as proper venting of carbon monoxide gas, installation needs to be done by a qualified gasfitter or plumber who is certified for high-voltage electrical work.
Improper installation of a hot water system can mean a high risk of catastrophic damage, including personal injury. Shamrocks’ will ensure your new water heater is properly installed so that you can enjoy years of safe hot water with peace of mind.
Water Heater Maintenance
Water heaters are typically out of sight and out of mind. However, they do require regular maintenance in order to provide long life and reduced energy costs.
If you live in the Central Okanagan, we can set up an annual maintenance program that will keep your water hot and your costs low for many years.
Shamrocks Plumbing and Heating is your Central Okanagan source for all things related to hot water heater problems. Count on us for guaranteed work at competitive rates.
Customer service satisfaction is essential and should be a given in any service-oriented company. Satisfying a client with quality service ensures that the plumbing company who provided the service would be hired to work on a future project for that customer. Word of mouth advertising and reviews from happy clients are the best tools for a business to accumulate more customers and clients. Naturally, when you get outstanding service from an organization, you will eventually recommend them to another person like a friend or a relative.
This principle applies whenever you hire the services of a any plumbing contractor to install all the plumbing requirements in a building or house. Keep in mind, plumbing systems are not limited to just basic plumbing fixtures or the setting up of pipes. It includes water heating appliances, the whole kitchen and bathroom installations, which includes the sink as well as the shower and tub.
Other basic parts of a plumbing service that a plumbing company should be able to provide are the repairing of broken pipes, garburators along with its cleaning and clearing of obstructed pipes. A plumbing company may also have heating and gas installations as part of their main service. Licensed plumbing services are exact experienced with local codes so you can benefit from the comforts of home free from worry.
The Value of Each Customer
A consumer is happy when the plumbing company provides good work . In most cases, this person will talk to a friend about the overall quality of service they received, thereby perpetuating referral advertising, which is the most beneficial lead any business could get. This being the case, any plumbing contractor who values their reputation and also have a yearning to serve the public for a very long time will be consistent with the quality of their work.
Local Regulations and Rules
Plumbing companies and their services are bound to different laws and regulations specific to where it is located. This ensures service quality and safety from businesses or individuals who perform such services . The industry needs to be regulated to assure the local government that only licensed plumbing businesses operate in the area. Whenever you want to hire a plumber, check online for testimonials on local companies and try to determine if they are a good fit for your needs.
Many people think they can fix their own plumbing problems. However, they need to remember they are governed by the same set of regulations and laws that binds plumbers. When you try to do it yourself, you may be putting yourself, your family and the entire building into more danger than when you hire an expert perform the work for you. Hiring a licensed professional eliminates the frustration you would undergo as you attempt to repair things yourself. This eliminates the problems you face when setting about to repair a plugged or leaking plumbing installation on your own. It is not worth compromising that small sum of money for a service you know little about.
We were brought to that editorial on water heater contractors from a good friend on our other web blog. If you please set aside a second to promote this blog entry if you enjoyed reading it. I cherish your readership.
We’ve encountered this great article about residential plumbing down the page on the internet and felt it made sense to quickly share it with you on this page.
Pioneer Plumbing has built a reputation of honesty with our long time returning customers. We’ve found that “doing the right thing” in all aspects of our company has brought us to where we are today, and will continue to guide us into the future. Don’t hesitate to call and ask us any plumbing, heating, ventilation, or gas related questions. Chances are if you have a tricky issue, we can solve it.
We have a few goals for our clients. One is to be available for you. It is very uncommon that when you call us we are unable to make it within the same day. We give our repeat customers priority service so if you’ve used us before and you have an emergency, we are going to do what we need to, to get someone there.
Two is to be upfront and honest. From our quotes to our service techs on site, we don’t like to beat around the bush. We will let you know our concerns, our recommendations, and our opinions on how we would handle each situation as if it were our own residence where the problem occurred. We won’t tell you the job is only a 2 hour repair when we have had situations where it turned into an all day repair.
Three is to stand behind our installations and repairs. With mechanical work, it is very common for jobs to get larger or go sideways as you get into them. If we give you a quote we will stand true to the price, if we complete a job for you and you are unhappy with the finished product, we will come back and make it right. In return, all we ask is that you communicate with our office respectfully and honestly so that we can make sure at the end of the day you are happy with our services!
So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.
Plumbing Services
We’re a full service plumbing company who is able to take care of any of your home or business needs, including new installation, maintenance, fixing leaks and all kinds of work in commercial and residential environments. Tub, tap or toilet… whatever it is you need you can count on us to send a certified plumber to take care of things in a respectful and competent manner.
Emergencies
Potential repairs can vary from minor jobs – like a leaking tap – to those which are, or could be, catastrophic. Our plumbers can offer the skills, tools and experience to remedy any sort of obstacle that crops up, and they’re experts at pretty much anything from leak detection to new pipework.
We are able to immediately take care of any plumbing issues that could arise in your home or business premises. If you have got a plumbing related emergency in Vancouver, please call us. We’ve got an emergency 24 hour plumber available who’ll be sent to your property ASAP. No matter what the time of day or year, you are able to rely on us for considerate and punctual support in your time of need. We appreciate exactly how traumatic plumbing related issues can be, in particular if it is an unexpected emergency after normal business periods.
All Types of Plumbing Installations
Pioneer Plumbing has got a long standing reputation for top notch workmanship. Whether you need to get a brand new basin or a bit of insulating pipe put in, or you require an installation or re-pipe in a residential or commercial building, we have the skills and experience to make certain it is completed according to the regulations.
We’re well-known also as a leader in modernizing the plumbing systems of old homes, something that we have been achieving for quite a while, in particular in the magnificent homes in Vancouver’s West End.
Our dedicated residential and commercial plumbing service is the best option for both heritage homes and contemporary homes throughout the greater Vancouver district.
1101-1202 Harwood St
Vancouver BC, V6E 1S3
Phone: (778) 839-2040
Place ID ChIJfSdjui5zhlQRyb_bmeZDqSo
Business Hours:
Friday Open 24 hours
Saturday Open 24 hours
Sunday Open 24 hours
Monday Open 24 hours
Tuesday Open 24 hours
Wednesday Open 24 hours
Thursday Open 24 hours
Types of Plumbing and Pipe Fittings
Types of Pipe Fittings
Adaptor
Barb
Coupling
Cross
Double Tapped Bushing
Elbow
Mechanical Sleeve
Nipple
Plug and Cap
Reducer
Tee
Union
Valve
Wye
Adaptor
Adaptors connect pipes that are not the same type. Because an adaptor can be male or female on one end, it can turn a pipe male or female.
If ends are non-threaded, they are left to be welded, soldered or glued to the pipe. Adaptors are used for PVC and copper piping.
Barb
A barb connects hoses to pipes. It is usually male at one end. The other has a barbed tube, which is a ridged and tapered cone.
It may also have a type of clamp to keep it secure. Barbs are made of plastic if they carry cold water and brass if they carry hot water.
Coupling
A coupling makes it easy to connect two pipes that have the same diameter and are the same type. It’s also used to repair a broken or leaking pipe. Along with a normal coupling, two other types are the compression coupling and slip coupling.
The compression fitting is connected between two pipes via rubber seals or gaskets on both sides which prevents leaking. A slip coupling includes two pipes, one of which slides out of the other pipe to a various length, to repair a specific length of damaged pipe.
Cross
A cross fitting has openings on all four of its ends and can connect four pipes. Cross fittings come with three inlets and an outlet or three outlets and an inlet.
Because they are the connecting point for four pipes, they are under more stress than other types of fittings and typically built tougher than other fittings.
Double Tapped Bushing
This is a type of nipple, but it has threading on both the inside and the outside. Because this center hole is threaded (tapped) from both top and bottom, it’s referred to as double-tapped.
A double tapped bushing is also a type of reducer, but does not have a reducer’s flexibility. A double tapped bushing is usually female.
Elbow
Not surprisingly, this sort of fitting has a bend that reminds you of the arm joint. They help the flow of water change direction. Elbows come in several degrees, including 22.5, 45, and 90 degrees.
Reducer elbow variations also exist for when the piping diameters being connected are different. Elbow fittings can be made of different materials, and most are female.
Mechanical Sleeve
This connects two pipes through the use of a screw or other device. This makes the fitting easy to install. The mechanical sleeve or coupling is usually made of rubber that is inserted inside a metal jacket (stainless steel clamp).
When the clamp is tightened, it compresses the rubber inside to make a tight seal. Because this fitting can be slightly flexed, it can accommodate small misalignments in hard to install locations.
Nipple
This is a short fitting that can be made of metals such as copper, brass or steel or chlorinated polyvinyl chloride (CPVC). Instead of connecting two pipes, a nipple connects two fittings.
If it has a continuous threading, it is a closed nipple. They are usually male and come in varying lengths.
Plug and Cap
Plugs and caps are both used to close up pipe openings during inspections and repairs. The main difference is that a plug is male while a cap is female. Most often, caps and plugs are threaded.
Plugs and caps are made of several materials, including metal, plastic or rubber and can be welded, soldered, glued, or threaded into the pipe.
Reducer
This fitting makes a flow smaller and thus reduces it. Reducers come in two types. The concentric reducer joins two pipes on the same axis, and the eccentric reducer is used to join pipes of different diameters.
The concentric reducer looks like a cone, while eccentric reducers look somewhat like bells with offset center lines. They prevent air bubbles in the pipes.
Tee
A tee has an inlet and an outlet and is shaped like the letter “T.” These fittings come in different sizes and are considered sturdier than the cross fitting.
A diverter tee is used in heating systems that use water. They come with directional markings and need to be installed correctly for the system to operate.
Union
Unions can have either male or female threads. They are similar to couplings, but the difference is unions are easy to remove making them convenient for maintenance or a planned future replacement.
A coupling, on the other hand, is more permanent and needs to be cut out. A union contains three parts: nut, male end, and female end. The nut is used to join the male and female ends.
Valve
Valves allow the flow of fluids to be adjusted. There are different types, including throttling, non-return and isolation. Non-return valves only allow the liquid to flow in one direction and are often found in drains. They’re also called check valves.
Isolation valves sequester a part of the plumbing system so that the system can be serviced or maintained. These valves are either left open or left closed all the time. However, because they may need to be used in a emergency, they should be checked now and then to see if they’re operational.
Throttling valves control the pressure and amount of a fluid. Because this stresses the mechanism, they tend to wear out faster than other valves. They are usually installed near isolation valves.
Wye
Built in the shape of the letter “Y,” this fitting is made to connect three pipes. Y fittings allow the pipes to change their elevations and to branch out into fresh water lines or drains.
Wyes are similar to tee fittings but the smoother angling reduces friction and turbulence in the water. This fitting is most commonly used to connect a vertical drainpipe to a horizontal one.
We hope you enjoyed our topic on leaking pipe. Thank you for taking time to read through our blog. Appreciated our posting? Please share it. Let someone else discover it. I take joy in reading our article about hot water heater installation.
Right here underneath you can locate some good expertise about water heater leaking from bottom.
Pioneer Plumbing has built a reputation of honesty with our long time returning customers. We’ve found that “doing the right thing” in all aspects of our company has brought us to where we are today, and will continue to guide us into the future. Don’t hesitate to call and ask us any plumbing, heating, ventilation, or gas related questions. Chances are if you have a tricky issue, we can solve it.
We have a few goals for our clients. One is to be available for you. It is very uncommon that when you call us we are unable to make it within the same day. We give our repeat customers priority service so if you’ve used us before and you have an emergency, we are going to do what we need to, to get someone there.
Two is to be upfront and honest. From our quotes to our service techs on site, we don’t like to beat around the bush. We will let you know our concerns, our recommendations, and our opinions on how we would handle each situation as if it were our own residence where the problem occurred. We won’t tell you the job is only a 2 hour repair when we have had situations where it turned into an all day repair.
Three is to stand behind our installations and repairs. With mechanical work, it is very common for jobs to get larger or go sideways as you get into them. If we give you a quote we will stand true to the price, if we complete a job for you and you are unhappy with the finished product, we will come back and make it right. In return, all we ask is that you communicate with our office respectfully and honestly so that we can make sure at the end of the day you are happy with our services!
So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.
Vancouver Plumbers
As a full-service, professional plumbing company we can carry out all your home service needs, which includes routine maintenance, new installations, leak repair and any sort of plumbing work in residential and commercial environments. Tub, toilet or tap… whatever it is you are looking for you can rely on us to send an accredited plumber to take care of things in a competent and courteous fashion.
Emergencies
Repairs can run from the minor variety – for example a leaking faucet – to more serious ones that are, or possibly could become, disastrous. Our professional plumbers have the tools, skills and experience to remedy any challenge that you encounter, and they’re specialists at everything from pipework installations to leak identification.
We’re able to easily sort out all sorts of plumbing dilemmas that may occur in your house or business. For all your plumbing emergencies, please call us. We’ve got an emergency 24 hour plumber on call who will be sent to you ASAP. Regardless of the the time of day or year, you will be able to depend upon us for attentive and timely assistance whatever you emergency. We know just how aggravating plumbing related problems are, especially if it is an emergency out of regular business periods.
All Sorts of Installations
We at Pioneer Plumbing have got a long standing reputation for superior quality workmanship. No matter if you would like to have some pipe insulation, or a brand new toilet installed, or you are in need of an installation or a complete re-pipe in a residential or commercial premises, we have the know-how and on-site experience to be certain all work is accomplished properly.
We are regarded also as a leader in modernizing plumbing systems in old properties, a thing we’ve been working at for years now, most notably in the amazing houses in the West End of Vancouver.
Our dedicated commercial and residential plumbing service is your best option for either contemporary homes or older properties all over greater Vancouver.
1101-1202 Harwood St
Vancouver BC, V6E 1S3
Phone: (778) 839-2040
Place ID ChIJfSdjui5zhlQRyb_bmeZDqSo
Business Hours:
Friday Open 24 hours
Saturday Open 24 hours
Sunday Open 24 hours
Monday Open 24 hours
Tuesday Open 24 hours
Wednesday Open 24 hours
Thursday Open 24 hours
Types of Plumbing and Pipe Fittings
Types of Pipe Fittings
Adaptor
Barb
Coupling
Cross
Double Tapped Bushing
Elbow
Mechanical Sleeve
Nipple
Plug and Cap
Reducer
Tee
Union
Valve
Wye
Adaptor
Adaptors connect pipes that are not the same type. Because an adaptor can be male or female on one end, it can turn a pipe male or female.
If ends are non-threaded, they are left to be welded, soldered or glued to the pipe. Adaptors are used for PVC and copper piping.
Barb
A barb connects hoses to pipes. It is usually male at one end. The other has a barbed tube, which is a ridged and tapered cone.
It may also have a type of clamp to keep it secure. Barbs are made of plastic if they carry cold water and brass if they carry hot water.
Coupling
A coupling makes it easy to connect two pipes that have the same diameter and are the same type. It’s also used to repair a broken or leaking pipe. Along with a normal coupling, two other types are the compression coupling and slip coupling.
The compression fitting is connected between two pipes via rubber seals or gaskets on both sides which prevents leaking. A slip coupling includes two pipes, one of which slides out of the other pipe to a various length, to repair a specific length of damaged pipe.
Cross
A cross fitting has openings on all four of its ends and can connect four pipes. Cross fittings come with three inlets and an outlet or three outlets and an inlet.
Because they are the connecting point for four pipes, they are under more stress than other types of fittings and typically built tougher than other fittings.
Double Tapped Bushing
This is a type of nipple, but it has threading on both the inside and the outside. Because this center hole is threaded (tapped) from both top and bottom, it’s referred to as double-tapped.
A double tapped bushing is also a type of reducer, but does not have a reducer’s flexibility. A double tapped bushing is usually female.
Elbow
Not surprisingly, this sort of fitting has a bend that reminds you of the arm joint. They help the flow of water change direction. Elbows come in several degrees, including 22.5, 45, and 90 degrees.
Reducer elbow variations also exist for when the piping diameters being connected are different. Elbow fittings can be made of different materials, and most are female.
Mechanical Sleeve
This connects two pipes through the use of a screw or other device. This makes the fitting easy to install. The mechanical sleeve or coupling is usually made of rubber that is inserted inside a metal jacket (stainless steel clamp).
When the clamp is tightened, it compresses the rubber inside to make a tight seal. Because this fitting can be slightly flexed, it can accommodate small misalignments in hard to install locations.
Nipple
This is a short fitting that can be made of metals such as copper, brass or steel or chlorinated polyvinyl chloride (CPVC). Instead of connecting two pipes, a nipple connects two fittings.
If it has a continuous threading, it is a closed nipple. They are usually male and come in varying lengths.
Plug and Cap
Plugs and caps are both used to close up pipe openings during inspections and repairs. The main difference is that a plug is male while a cap is female. Most often, caps and plugs are threaded.
Plugs and caps are made of several materials, including metal, plastic or rubber and can be welded, soldered, glued, or threaded into the pipe.
Reducer
This fitting makes a flow smaller and thus reduces it. Reducers come in two types. The concentric reducer joins two pipes on the same axis, and the eccentric reducer is used to join pipes of different diameters.
The concentric reducer looks like a cone, while eccentric reducers look somewhat like bells with offset center lines. They prevent air bubbles in the pipes.
Tee
A tee has an inlet and an outlet and is shaped like the letter “T.” These fittings come in different sizes and are considered sturdier than the cross fitting.
A diverter tee is used in heating systems that use water. They come with directional markings and need to be installed correctly for the system to operate.
Union
Unions can have either male or female threads. They are similar to couplings, but the difference is unions are easy to remove making them convenient for maintenance or a planned future replacement.
A coupling, on the other hand, is more permanent and needs to be cut out. A union contains three parts: nut, male end, and female end. The nut is used to join the male and female ends.
Valve
Valves allow the flow of fluids to be adjusted. There are different types, including throttling, non-return and isolation. Non-return valves only allow the liquid to flow in one direction and are often found in drains. They’re also called check valves.
Isolation valves sequester a part of the plumbing system so that the system can be serviced or maintained. These valves are either left open or left closed all the time. However, because they may need to be used in a emergency, they should be checked now and then to see if they’re operational.
Throttling valves control the pressure and amount of a fluid. Because this stresses the mechanism, they tend to wear out faster than other valves. They are usually installed near isolation valves.
Wye
Built in the shape of the letter “Y,” this fitting is made to connect three pipes. Y fittings allow the pipes to change their elevations and to branch out into fresh water lines or drains.
Wyes are similar to tee fittings but the smoother angling reduces friction and turbulence in the water. This fitting is most commonly used to connect a vertical drainpipe to a horizontal one.
As a keen reader about 24 hour plumbers near me, I assumed sharing that piece of content was worthwhile. Kindly take a moment to distribute this blog post if you enjoyed reading it. Thanks a bunch for being here. Don’t hesitate to check up our site back soon.
At K.C.’s Plumbing & Heating we are widely known throughout Vancouver for providing quality plumbing services that will exceed your expectations as a new customer. And we are the go-to plumbing company for many clients who hire us for maintenance on various plumbing or heating needs.
Emergency Plumber Parts and Service Near by in Vancouver
There are two things that enter into your mind when plumbing work is necessary. Should you call for a professional for help, or maybe handle it yourself?
If gas is involved, it’s a far better idea to contact a heating expert. To get a much better chance of passing the test conducted by an inspector, an authorized professional must work on the plumbing. If you do it on your own though would you get in touch with the inspector? If you feel uncomfortable with the issue, then it is strongly recommended to call several plumbing companies for an estimate.
Tactics of Finding Local Plumbers
There are many plumbers that like to travel as little as possible, as most of them love to work close to home. You can possibly find them in your local papers. As always, they can be located via social media aside from the Yellow Pages where they are listed. Key terms like “plumbing” or “plumber” added with your local community for example “plumber Vancouver” can be used in searching online. Look for a well-designed website, because that plumbing provider would like to be percieved as professional and you will feel more comfortable.
Learn More About Call-Out Fees
When you contacted plumbers by phone, a lot of them will give you a price quotation. If they arrive in person expect a “call-out fee” if you decide against hiring the guy. Plumbers do not prefer that charge however would prefer to focus on the work asked. Simply because it’s a regular practice among them considering that manpower is involved.
Check out the credentials of the plumber to ensure the work they do will last as it generally does. You could ask them if they will be sending a journeyman and they will inform you if that work even requires that level of expertise.
Simple Maintenance Does Help
There’s absolutely nothing bad in inquiring. Ask the plumber what must be done to extend the life of hot water tank or your furnace. A few simple things can be carried out like figuring out how often the filter should be changed or is it great to have a better quality air filtration system.. In case you have radiant heat that has its own schedule for maintenance. In any situation, you’ll benefit from knowing a good schedule for maintenance on those major appliances..
The recommended schedule to examine a gas furnace is every two years. You could also lengthen the life by looking at the water tank as well.
If you need hydro jetting done call us for a quick quote by phone, so you know what you are looking at.
Our office number – (604) 873-3753
No job too big or small, we can fix it. When you need a licensed plumber or are looking for faucet repair we are the logical choice. Recommended by your friends and neighbors as their go-to sewer cleaning experts. No matter what the problem, you can count on us. For the fastest service, use this phrase in search local plumber near me. Our name usually comes up
At K.C.’s Plumbing & Heating we are widely known throughout Vancouver for providing quality plumbing services that will exceed your expectations as a new customer. And we are the go-to plumbing company for many clients who hire us for maintenance on various plumbing or heating needs.
Master Plumber Company Near me in Vancouver
When you need plumbing work done, two things come to mind immediately. Is professional help essential, or should you just do it on your own?
In the event the plumbing problem includes gas, it would be better to have a heating professional. To have a much better chance of passing the test conducted by an inspector, an authorized professional ought to work on the plumbing. If you try it for yourself though would you contact the inspector? To ensure the work is done correctly and safely, get the plumbing service performed by professionals. Contact them for quotes.
Local Plumbing Companies: How to Locate Them
Locating these local plumbers is easy since they like to work close to their office. They normally are advertised in your local daily papers. As usual, they can be found via social media besides the Yellow Pages where they are listed. Key terms such as “plumbing” or “plumber” included with your local community for example “plumber Vancouver” can be used in searching on the internet. Look for a well-designed website, because that plumbing firm wants to look professional and you will feel more comfortable.
What’s Call-Out Charges
Nearly all plumbers will offer you a quote over the phone for a simple job. Plumbers who arrive in your location to work on your plumbing typically requested a “call-out fee” if you turn them down. Plumbers don’t like doing that and would prefer to do the work than ask you for a call-out fee, but time and gas is involved in a house call, thus a call-out fee is usual practice.
Check the credentials of the plumber to ensure the work they do will last as it typically does. Request the company not to send an apprentice so they can send you the most skilled of them all.
No Need for Complicated Maintenance
The plumbing technician knows how to nest maintain your hot water tank or furnace so do not be shy seeking suggestions how. A few simple things can be carried out like figuring out how often the filter should be changed or is it great to have a better quality air filtration system.. In case you have radiant heat that has its own schedule for upkeep. Knowing when to schedule your major appliances for maintenance is quite beneficial in the long run..
A water tank could also be looked at during maintenance of your forced air furnace every two years.
If you need grease trap cleaning done call us for a quick quote by phone, so you know what you are looking at.
Our office number – (604) 873-3753
No job too big or small, we can fix it. When you need a licensed plumber or are looking for plumbing contractors we are the logical choice. Recommended by your friends and neighbors as their go-to house plumbing experts. No matter what the problem, you can count on us. For the fastest service, use this phrase in search plumbing services near me. Our name usually comes up
At K.C.’s Plumbing & Heating we are widely known throughout Vancouver for providing quality plumbing services that will exceed your expectations as a new customer. And we are the go-to plumbing company for many clients who hire us for maintenance on various plumbing or heating needs.
24 Hour Plumber Service Work in Vancouver
These two things enter your mind immediately after you think about your plumbing. Should you contact a professional for help, or just do it by yourself?
A heating professional can carry out the work if the plumbing issue includes gas. A licensed professional would be preferable to hire so the job will pass if an inspector examines it. If you try it for yourself though would you call up the inspector? If you think the quality of your works is questionable, then have your problem serviced with a licensed plumbing company. Call them now for a quotation.
How to Come across These Local Plumbing Companies
Finding these local plumbers is simple since they like to work close to their home. They are generally promoted in your local daily papers. There is the typical media of course and Yellow Pages still have lots of plumbers shown. Key terms like “plumbing” or “plumber” added with your local area for instance “plumber Vancouver” can be used in searching on the internet. A well-designed site is a sign that a plumbing company is a professional company.
Get more information About Call-Out Fees
When you have called a plumber, many of them commonly offer you a quote for a specific job. Plumbers who arrive in your place to work on your plumbing normally asked for a “call-out fee” if you turn them down. Plumbers don’t prefer that charge but would prefer to focus on the work requested. Simply because it’s a usual practice among them considering that manpower is involved.
Plumbing pipes are made to last a long time. You could ask them if they will be sending a journeyman and they will let you know if that job even requires that level of expertise.
No Need for Complicated Maintenance
The plumber knows how to nest maintain your hot water tank or furnace so do not be shy requesting ideas how. There are a couple of simple things you should know like how often to change the filter on your furnace, or if you would benefit from a better air filter system.. In case you have radiant heat that has its own schedule for upkeep. In any situation, you’ll benefit from knowing a great schedule for maintenance on those major appliances..
Every two years, have your forced air furnace scheduled for servicing. Include the examining of your water heater too in the schedule.
If you need leaky faucet repair work done call us for a quick quote by phone, so you know what you are looking at.
Our office number – (604) 873-3753
No job too big or small, we can fix it. When you need a plumber or are looking for plumbers we are the logical choice. Recommended by your friends and neighbors as their go-to clogged drain experts. No matter what the problem, you can count on us. For the fastest service, use this phrase in search 24 hour plumbers near me. Our name usually comes up
At K.C.’s Plumbing & Heating we are widely known throughout Vancouver for providing quality plumbing services that will exceed your expectations as a new customer. And we are the go-to plumbing company for many clients who hire us for maintenance on various plumbing or heating needs.
24 Hour Emergency Plumbing Repair Near me in Vancouver
You immediately think about two things whenever you are dealing with a plumbing problem. Are you able to try it for yourself, or should you call a professional?
In the event the plumbing problem includes gas, it will be better to get a heating professional. Someone licensed to work on natural gas home appliances know the procedures, and if an inspector is called it will possibly pass. If you try it for yourself though would you call up the inspector? When you feel not comfortable with the problem, then it is strongly recommended to call some plumbing firms for an estimate.
Methods of Finding Local Plumbers
Searching for these local plumbers is simple since they like to work close to their office. They’re usually promoted in your local daily papers. Obviously, the social media can help you on that aside from the Yellow Pages. Key terms such as “plumbing” or “plumber” added with your local area for example “plumber Vancouver” can be utilized in doing a search online. You can tell a great plumbing company through its well-designed site. This reflects who they are in offering services.
Inquire about Call-Out Charges
Nearly all plumbers will provide you a quotation over the phone for a basic job. Plumbers who reach your place to work on your plumbing normally asked for a “call-out fee” if you turn them down. It’s a typical practice among plumbers to charge a call-out fee even though they do not like asking for it. They rather give attention to the work at hand however time and fuel is involved here so this occurs.
Plumbing pipes are built to last a long time. Better to request them if will they be sending a journeyman. Tell them that the work available needs an expert plumber.
No Need for Complex Maintenance
The plumbing technician knows how to nest maintain your hot water tank or furnace so do not be shy asking for ideas how. A few simple things can be done like figuring out how often the filter should be changed or is it good to have a better quality air filtration system.. In case you have radiant heat that has its own schedule for upkeep. In any case, you’ll benefit from knowing a great schedule for servicing on those major appliances..
Every two years is the proposed maintenance schedule on a forced air furnace, and you might as well have the guy examine your water tank as well.
If you need a plumber call us for a quick quote by phone, so you know what you are looking at.
Our office number – (604) 873-3753
No job too big or small, we can fix it. When you need a master plumber or are looking for plumbing services we are the logical choice. Recommended by your friends and neighbors as their go-to drain cleaning plumber experts. No matter what the problem, you can count on us. For the fastest service, use this phrase in search plumbing and heating near me. Our name usually comes up
Bale Brothers Plumbing and Heating 
